How-to cut windshield

[MonctonR1]

Hey guys,

Seeing all the fellas with the low-shield cut ever lower made me want the same. How are you cutting theses. Sheers, knife... Hard to cut this stuff to make it look right!

Thanks.

 

[richierich]

If you have a roto-zip thats the easiest.Or hacksaw blade or you could try a shear but make sure its warm.

 

[n2oiroc]

i use a fiber cut off wheel on a dremel.

 

[Venom]

Save your money and use a $10 pair of tin snips. I used them and they worked great! Only took 5 minutes.

Roger.

 

[redsnake3]

i done this a few times and tin snips arent the easiest, use a hand held jigsaw very accurate, smooth edge and very fast and easy.

 

[onlyblue]

woodworker, u followed my instructions.... new tin snips work well and easy to use..... a dremel would be slick as well......

 

[shortstop20]

i done this a few times and tin snips arent the easiest, use a hand held jigsaw very accurate, smooth edge and very fast and easy.

Ditto!

 

[MonctonR1]

OK so jigsaw would be the best... Well will have to try that out then.
B