Torque on head and syl. (SX500R - 2001)

[sxtheviper]

How many Nm should the Head on a sx500r be tighten with?

And with how many Nm should the syl. be tighten to the crankcase?

 

[98srx6]

You should try to search the site before posting a non-specific question. In most cases, the question you are asking has been covered before.


http://www.totallyamaha.net/forums/showthread.php?t=16754&highlight=torque

 

[sxtheviper]

Sorry.. i tried to look in the tech pages, but didnt see it..

 

[sxtheviper]

Iam pretty confused rigth now.. This page you linked to, says:

SX/Vmax Cyl: 24 ft lbs (32.4 Nm)..

But i called my local yamaha dealer and he said about 9.62 ft (13 Nm) lbs on the Cyl.

The paga also says: SX/VmaxTwin Style Heads: 16 ft lbs (21.6 Nm)

My local yamaha dealer says: 17.02 ft lbs (23 Nm)

Anyone that could say what's rigth or wrong?

 

[yamaholic22]

go with 24 ft*lbs on the cylinders for sure. On the head, one ft*lb is not going to make much difference, just go 17 ft*lbs

 

[sxtheviper]

Ok, Thank you yamaholic22!!