yammiman
Member
Found this thread through the search section - is the Artic Cat paint still one of the better exhaust paints? - or do you guys have some other suggestions?
http://www.totallyamaha.net/forums/showthread.php?t=8038&highlight=exhaust+paint
http://www.totallyamaha.net/forums/showthread.php?t=8038&highlight=exhaust+paint


2ooosrx
VIP Member
- Joined
- Oct 2, 2004
- Messages
- 2,414
- Age
- 35
- Location
- Gurnee, Illinois
- Website
- www.cbperformanceparts.com
I am going with this stuff when I finish my pipes. It is good till 2000 degrees it says. No worries there.
http://store.summitracing.com/default.asp?target=partdetail.asp?part=VHT-SP102
http://store.summitracing.com/default.asp?target=partdetail.asp?part=VHT-SP102
yammiman
Member
Thanks - I'll try it
NY AttakGT
VIP Member
They sell that VHT brand header/exaust paint at AutoZone stores, if you have them by you. I just painted my exhaust last week with it. Looks sharp. But the pipes are going to be wrapped so not gonna see much of them anyway. Hope this helps.
--Steve (O.C.)
--Steve (O.C.)
Brad
New member
- Joined
- May 23, 2003
- Messages
- 403
The high heat ceramic paint by dupli-color from walmart works great as well
yammiman
Member
Alot of AutoZones around here - I'll check it out
B2SO
New member
- Joined
- Aug 18, 2003
- Messages
- 422
- Age
- 53
Hey yammiman , when you get everything painted , let me know and i can bake them for you , i use the cheap stuff from meijer thats good up to 1500 , but you need to bake in a oven after there painted to get the full effect , the old man runs a plastic factory in east lansing and they have huge ovens i use to bake all my stuff after being painted ..

duplicolor header and exhaust paint with ceramic,many colors,used the white on my sno-blower engine looks really good.
nailsandrails
VIP Member
I also use the dupli-color from Wal-Mart. It is the best I have found. I paint one pipe at a time and put a heat gun in the end of the pipe. It's the closest I can come to baking it on.
It works well and the pipe does get very hot from one end to the other.

yammiman
Member
Thanks for all the info guys - B2SO - I might take you up on the baking, as long as I can bring some cookies to bake at the same time! LOL
B2SO
New member
- Joined
- Aug 18, 2003
- Messages
- 422
- Age
- 53
Yammi , Just let me know when your ready , the shop is open on saturdays also , we can through them in the over and go grab a burger over at paul reverses (sp) let them bake an hour or so and go pick them up , or i can stop by and grap them bake em and drop them back off . let me know ..
yammiman
Member
Sounds good
montynormand
Member
why not just have them ceramic coated? just hade my race pipe done by perfromance coatings out in washington. less than a 10 day trun around
yamyrider
Active member
thats an easy answer $$$$$ Painting the pipes is about $15.00