I am putting a Hacksaw on my stock (clutched) 02 Viper tomorrow. I was considering gearing down 1 tooth on the top while I was at it to get a little more corner to corner.
My questions are: I am clutched right on now (after lots of tinkering). Will I need to mess with this again?
Exactly how much top end should I expect to loose?
My questions are: I am clutched right on now (after lots of tinkering). Will I need to mess with this again?
Exactly how much top end should I expect to loose?
..SNAKEBIT..
VIP Member
@ 5mph from the chart
if your running the 22 top now I would go to the 21 in a heart beat
if your running the 22 top now I would go to the 21 in a heart beat
is it 5mph for a top tooth change and 2.5mph for bottom tooth change?