the primary will not return fully at idle, can I lube it, clean it, or do I have to pull the clutch and replace the spring?
Blue Devil
New member
probably your weights and rollers are gone. you might want to check them.
Bakemono
New member
Id pull apart the clutch, clean it and replace the spring and weights.
I just recently put a clutch kit on my Polaris. The spring and weights had about 5000 miles on them and the bushing on the weights were pretty much worn-out.
This would be a good time to put a clutch kit in your sled. Youd gain some considerable performnace that way.
I just recently put a clutch kit on my Polaris. The spring and weights had about 5000 miles on them and the bushing on the weights were pretty much worn-out.
This would be a good time to put a clutch kit in your sled. Youd gain some considerable performnace that way.