Trailing arm price

[tommyt5078]

How much should I expect to pay for a used right side trailing arm for a 98' SRX? Does anyone know how much one is new?


Thanks,
-Tom

 

[crimsonride]

I think you can get a new one from Denis Kirk for pretty cheap. Seems like they were about $60.

 

[crimsonride]

http://www.denniskirk.com/jsp/produ...8&productId=p04164&leafCatId=30806&mmyId=3394

 

[skidooboy]

when you buy new, you'll need new bushings (upper and lower spindle at front of arm) the lower crush washer. the rear mount bushing and the decal.

the rear bushing doesnt come in the new or dennis kirk after market arms.
it needs to be pressed in you cannot "hammer" it in.

you might be able to do it in a vise. you need to see how far in the old bushings are pressed in, and mimick the "press" in the new arm. some are pressed shallow, some deep, and some centered.

if you buy used verify if the front spindle bushing and decals are intact, and if there are any flaws or bends in the arm. they are very weak so buyer beware. ski

 

[tommyt5078]

Thanks guys

Ty is one cool site