Rox Risers - Got 'em? Do you like them?

Y

Yooper_Bob

VIP Member
Joined
Feb 7, 2005
Messages
35
Location
Marquette, MI
I need to put a set of risers on my '05 Warrior, and I am thinking about using the Rox risers, but would like to hear the opinions of others who have used them...any problems?

I like the Rox one piece design better than the Power Madd where you have to buy a pivot adaptor and then a riser block, and then bolt a whole bunch of pieces together.
 
Have the 2" Rox on my Viper and LOVE em'. Made the ergonomics SOOOO much better. A little pricey, but worth it. Very high quality. 250+ hard miles and no movement.
 
I put one on my SRX and it works great,the only thing I need to do is put on longer throttle and oil pump cables.The 98 cables aren't that long and if I plug my TORS in it will activate when I least expect it to.

:die:

These new smiles are a riot.
 
i want to put them on my SXR, i want them to be straight up and down. so what would be the best brand to get a 2 or 3 inch riser bar with? Sportech,powermadd,rox?? which one would you guys recommend? i need it to be able to adjust, i dont want just a block.
 
Last edited:
Get the 3.5" rox rich has! I bought my riser and cables and brake line from Rich give him a try! Thats what i bought and it works good for adjustablity. You can go straight up if you'd like The shop (Precision Motorsports) that has my sled right now the owner just finished my sled and took it for a spin, said "This is the most fun sled ive ever riden" and "This thing fricken RIPS!" Can't wait to try out my new setup now!!!!!

Here are my bars with it on and with my new bars. The brake line is hooked up now! Mine are pretty straight up too
 

Attachments

  • 100_0076 (Medium).JPG
    100_0076 (Medium).JPG
    119 KB · Views: 25
Last edited:
I don't think I would go over 3-3.5 with out putting on a high rise seat, unless your 6' or taller. Even then I would consider the seat to help out with your knee's! Any higher than that I don't think you'll like the majority of your trail riding, lets face it, unless your riding 3' moguls 80-90% of the time the bars don't need to be that high!! ;)!
 
I've got the 5" Rox pivots and LOVE them. I'm 6'3" and ride mostly powder and some hills so it was an absolute necessity for me. Mine haven't moved yet this season and you can dial them in to the hand position you like. I did get a WPS brake line extension and re-routed my cables thru the top lid of the airbox. I'd give them a BIG ;)! ;)!
yama_yooper said:
I need to put a set of risers on my '05 Warrior, and I am thinking about using the Rox risers, but would like to hear the opinions of others who have used them...any problems?

I like the Rox one piece design better than the Power Madd where you have to buy a pivot adaptor and then a riser block, and then bolt a whole bunch of pieces together.
Click to expand...
 
Im just gonna get the 2 inch this year and next year ill rise it up more when ive got more cash in hand to buy cables etc. In fact i just ordered my Rox's!!
 
I used risers similer to the rox risers but there made for choppers there teally strong to i got them off ebay, i got 6" for mine but rox risers only go up to 4" i think you can get 4" on ebay to just type in Bone Dog risers i like mine alot
 
tried to put 6 inch power maid and pi ot on last night.
what a joke
they want you to dill out your colum, then put bolts up from the bottom.
after all that i find the two trollet ext will not work on yamaha.
know need to get it back to stock.
need to go find mtn viper cables i gess to see if that will help.
dont use power maid trotel extensions they will not work on yamaha.
 
You must log in or register to reply here.


Back
Top