bizerker9
New member
- Joined
- Dec 24, 2005
- Messages
- 1
hey any one no the propper torque pattern for the heads and the cylenders.It is for a 2001 yamaha srx . thanks for all the help
torque
I don´t have a pattern but the torque shuld be 20 ft Ibs = 27Nm.
I would start with the bolts parrallel to the piston pin (because here is where the guide pins are) and It´s common practice to torque bolts in three steps.
This will give approx. 7, 13, 20 Ibs. Or 9, 18, 27 Nm. It´s not easy to find torque wrenches with this low values, I usally thighten by feel and common sense and use my torque wrench for the final torque.
I´m not an expert but this works for me!
I don´t have a pattern but the torque shuld be 20 ft Ibs = 27Nm.
I would start with the bolts parrallel to the piston pin (because here is where the guide pins are) and It´s common practice to torque bolts in three steps.
This will give approx. 7, 13, 20 Ibs. Or 9, 18, 27 Nm. It´s not easy to find torque wrenches with this low values, I usally thighten by feel and common sense and use my torque wrench for the final torque.
I´m not an expert but this works for me!