After 300 miles PV's

[SRX7]

Not bad they are very smooth and just have the black exhaust on them but no soot like Yammi lube would leave.
Sorry for out of focus.

 

[yamvip]

What type of oil are you using???

 

[03viperguy]

did you change any settings at all? oil pump or jetting etc?

 

[SRX7]

IPONE. I just changed the setting on my cable to 22mm. So they should stay even cleaner.

 

[03viperguy]

so the larger the gap, the leaner? thanks for the input what do the plugs look like?

 

[SRX7]

Not sure, Ill go check.
This is not from a wide open run it was from farting around in a field before loading on the trailer.

 

[03viperguy]

how old are the plugs? has a nice brown, but the outside looks like it is a bit gummy. if it is old plugs than it might just be age. reason I ask is with everything totally stock, my 03 viper had perfect plugs. went to klotz, and now they look a tad bit darker than they should. little wet, but not soaked. dont have the sled here to take a pic, but thinking it may need to be turned down a bit with the thinner klotz in it now. thanks!

 

[SRX7]

These plugs have been in from last season and as I said before have not had a good run on them,wide open that is.Im sure the oil will be fine and will keep the valves clean.

 

[daman]

yup...need to check them after a good WOT pull.

 

[SRX7]

With the tip being brown like it is I think the air/fuel ratio is fine. Now that I have leaned out the oil pump it should be better as far as the PV's go and maybe colour of the plugs.
Yes they do need a good run but as far as replacing the plugs they have not fowled or have never missed a beat.

 

[daman]

Hell yea there good plugs yet