Viper Reed Valve Damage Help ASAP

Automed

New member
Joined
Oct 18, 2004
Messages
101
Location
Edmonton, Alberta
Here is a picture of the reed valve on the mag side of the engine notice the center petal is missing some material and seems to be a different colour / texture in the center.

Is this cause for concern? Should it be replaced or I'm worrying about nothing?

Thanks
 

Attachments

  • viper reed valve.JPG
    viper reed valve.JPG
    81.6 KB · Views: 11

sometimes if a sled backfires they will break or chip I have seen it before.My buddies mod sled backfired and blew pieces into the carbs.
 
i had one of mine looking like that last year, and another cylinder had a cracked petal.... i replaced with boysen reeds.....

probably back fire/heat issue..... i am not sure of the expected life of a set of reeds, but mine were 4000 miles old when i replaced them (roughly)
 
Thanks guys!

I'm gonna go to the Yamaha dealer tomorow and buy a replacement petal.

Good thing I took them off to have a look.

Sled only has 1000miles on it.
 


Back
Top