tagoes10s
New member
http://web.corvettecentral.com/danbaber/Video/02viper.mov
We don't have much snow in SW Michigan so I thought I would go out and play in the back yard. Can't wait to actually ride!!!!!!!!!!!!!!!!!!!!
We don't have much snow in SW Michigan so I thought I would go out and play in the back yard. Can't wait to actually ride!!!!!!!!!!!!!!!!!!!!
Jigg
New member
That's awesome!!! You could definitely go all the way around!
03viperguy
Moderator
WOW! how'd you get the viper to do that? whats your setup? pipes? how did you set the skid? I want to get mine to do that just for fun. not usefull on the trails, but fun for a little while on the lake lol!
yamaholic22
Active member
03viperguy said:
Dan
02 Viper, CPR Pipes, HH Clutch kit, CPR head mod, MR. Viper porting, CF Reeds, Studed 1 1/4 Ripsaw, 8 tooth drivers, Updated shocks, C&A skis.
guess its runnin on all 3 again....lol
cacsrx1
New member
When I set my transfer rods to "full Transfer" I just about need a Yard Sale sign. I have bailed more than once...lol 
Yamahammer485
Member
Have you guys had any problems with ratcheting with your rods set to full transfer?
I heard this happens and read it in the instructions that cmae with my Maxxperf set.
I heard this happens and read it in the instructions that cmae with my Maxxperf set.
Yamahammer485
Member
Awsome wheelie too!, hopefully mine will wheelie better now too with the quick rods installed.
cacsrx1
New member
Mine will rachet at full transfer with real good traction, in soft snow it usually doesn't.
03viperguy
Moderator
yeah, thats why it pulls up like that. pretty much no way my stock motor and suspension will do that. all I have is a ripsaw. doubt I could dial it in like that loL!
Yamahammer485
Member
Is your track really tight too? My sled really sucks for skider wear cuz the windows are small and its cliped a thrid as much as a regular track and every 3rd window is closed. Running it tighter will make it wear faster. Going to put extroverts next year.
tagoes10s
New member
Ah thanks for the compliments... and thanks to Don for the porting. I have transfer rods but they were actually in the middle setting, The limiter straps are on the loose setting. Ripsaw track with 144 studs, 8 tooth antiratchet drivers so I can run the track fairly loose, and I geared back to stock. Since I don't have snow here yet, I just go out and ride wheelies accross the yard 
I just sit back on the seat and hang on. The first time it damn near went all the way over. The cool thing is it powers itself into the wheelie. It isn't a instant pop the skis off... it takes about 20-30 feet before it fully lifts the ski's. Just having fun!
Dan
I just sit back on the seat and hang on. The first time it damn near went all the way over. The cool thing is it powers itself into the wheelie. It isn't a instant pop the skis off... it takes about 20-30 feet before it fully lifts the ski's. Just having fun!Dan
Last edited:
Waterfoul
New member
20 or 30 feet? Looks like 2 to 3 feet to me!!
cacsrx1
New member
Yamahammer485 said:
I have my limitters pulled tight, the sliders wear to a point then stop.
That is a sweet wheelie, nice sled. 
2000sxr600
New member
holy shit man, thats sick!!!