940ken
Member
MANY THANKS TO MR. VIPER . SETTING UP MY HEELCLICKERS & HEEL-X WENT VERY WELL. RUNNING 4.8 HEEL 4.3 TIP SILVER 80 DEGREE . GOING TO ADD .5 GR. TO HEEL TO LOWER ENGAGEMENT TOWARDS 4000 FOR A BETTER HOLESHOT . RUNS 8400 , BACKSHIFTS GREAT!! SHOWED 107 ONCE WHILE HANDING A 600HO REV HIS @$$ , OVER 100 LBS. DIFFERANCE IN WEIGHT. 03 VIPER WITH A RIPSAW. 
CATCH ME IF YOU CAN 
CATCH ME IF YOU CAN 
keep loading up the heel till it gets boggy, I have run 5-6 washers, plus the lock washer and the long bolt in the heel.
Most people dont realize the 600ho rev will whip up on its 800 big brother in a field race, they run pretty good in a short run, but they are hardly the all mighty.........glad to hear it ..lol
Most people dont realize the 600ho rev will whip up on its 800 big brother in a field race, they run pretty good in a short run, but they are hardly the all mighty.........glad to hear it ..lol
Millinocket Rocket
New member
940-- you running stock pipe and red primary spring? pretty close to what i'm running-about 5.3 heel, 3.2 tip- haven't tried my silver spring out on the lake yet though. also just ordered some 15 mm rollers. you got stock rollers? mr viper helped me get set up too
940ken
Member
MY SLED IS STOCK EXCEPT FOR RIPSAW , REAR COOLER , HEELCLICKER AN HEEL-X . PRIMARY SPRING IS RED . CAN'T WAIT FOR MORE SNOW!!! 