Non PV 700 Bigbores

R

richardspipes

New member
Joined
Aug 13, 2004
Messages
60
Age
49
Location
Michigan
Anyone running a bigbore kit on their non PV 700?

If so who did the work, what pipes, clutching and jetting are you running and how do you like it!

Thanks ;)!
 
We ran a Bender 800 a few years ago and used their pipes and clutching when we first got it, but later went to Heavy Hitters. Motor dyno'd around 174hp with 38 flatslides. We ran 33's on the trail and the motor ran well. No issues and was always in the mix when it came to racing the big boys. Set it up right and you should be right in there.
 
One of the guys that was on my recent UP trip was running a '99 SX700 that had the snocross setup Nathan Titus used in that year. He raced it back then. It has a 760 Hauck motor with Hauck (CPR) pipes, 4 Ohlins with the beefed shafts long traveled, and a 1.5" Camo. This sled absolutely is a riot to ride. It would do wheelies in the deep powder. We ran it against the new Attak on some drag sessions for fun and it held it's own up to 80 mph. We were running the power lines by Twin Lakes, MI. and he snapped the front driver shaft right at the bottom gear. It just happened to be at the bottom of a ravine. Eight of us hooked a pull rope on the front and pulled it out to get it to a trailer. What a cardio. He has another titanium front driver shaft for it and a stock motor. He was talking about parting it out. I attached a photo of it. If anyone is interested send me a PM and I'll contact him.
 

Attachments

  • Picture 025 (Custom).jpg
    Picture 025 (Custom).jpg
    17.1 KB · Views: 275
  • Picture 032 (Custom).jpg
    Picture 032 (Custom).jpg
    23.4 KB · Views: 275
Last edited:
I think he wants around $25-3000 for the whole works. You get a new titanium front driver and a spare stock motor too. Cosmetically it could use a new hood, it has some light spider cracks on the surface. It has a new #9903 1.5" Camo track on it,the 4 beefed up Ohlin shocks are nice. The running boards are widened at the rear. The sled is really fun in the powder. You can stand at the back of the running boards from a dead stop in powder and mash the throttle and it will literally ride a wheelie. This thing is fun!!
 
You must log in or register to reply here.


Back
Top