JERSEYJOE
Member
Is it possible to install a complete Viper front end on an SRX? I know the upper shock mount is an issue, but is everything else a bolt on?
Next question: Any one have a complete set up?
Next question: Any one have a complete set up?
JERSEYJOE
Member
SRX / VIPER front suspension
Back to the top .
Back to the top .
ReaperSRX
Member
NO, been there done that, you need radius rods, etc off either and SXR or newer VMax's deluxes..........James
JERSEYJOE
Member
Reaper
I already have the Maximmum front kit. I was looking to swap in the Viper trailing arms, spindles, and front shocks.
Is this possible and / or worth the trouble?
I already have the Maximmum front kit. I was looking to swap in the Viper trailing arms, spindles, and front shocks.
Is this possible and / or worth the trouble?
take the viper bodies and have the srx shafts installed in them, this will give you 1 1/2 inch longer shock and will bolt in stock locations.
JERSEYJOE
Member
Betheviper
Is this something that Pioneer can do? Also is it worth anything to use the Viper trailing arms and spindles?
Is this something that Pioneer can do? Also is it worth anything to use the Viper trailing arms and spindles?
all you will gain is camber and 1in height lift. if your using lower sadle skis this will help.
JERSEYJOE
Member
Bethe Viper
You Got A Set Of Trailing Arms And Spindles?
You Got A Set Of Trailing Arms And Spindles?
i have a crome set for sale over on the classified, everything you need to widen and make taller your srx, all in crome for 600shipped to you.spindles included
i have a set of rear viper udated shocks for sale for 210 shipped, they are new, never used.
these are the ones that they replace the bad one with.
let me know
trucker crome is cool
i have a set of rear viper udated shocks for sale for 210 shipped, they are new, never used.
these are the ones that they replace the bad one with.
let me know
trucker crome is cool