Seat foam to replace 02 viper seat

kinger

VIP Member
Joined
Nov 12, 2004
Messages
796
Location
Clear Lake, IA
Anybody know where I can get some foam that is actually soft? I was going to add to the current seat but am thinking of getting some good foam and make the whole seat one type of foam, instead of plopping 2" on top of the current board. Anybody have a clue what type of foamis required and where to get it?
 
150$ i supply the srx seat foam. i remove your cover, carve your outer seat shape off. glue it over an srx seat foam i have carved to make fit your pan. then reinstall cover.

seat will look about 1inch thicker but will sit about the same ride height when done.

i did mine four years ago and three others, no problems with any.

the reason for using your outer is that the seat is wider at the top and flatter then the srx seat. i use the outer layer for shape only.

the seat is heaven. it is close to or softer than the 04 viper seats when done.
 
I just took my 2002 viper seat into an upolstry shop and told them to cut out some of that soft foam and put as much firmfoam as they could.
it worked out great! Much cheaper the it cost me when I had the shocks revalved and similar improvement on total shock felt by back on 4 foot bumps.
 
i dont make the seat any taller. this would involve an apholstry shop, if you want ride and height you will need to by a boss high rise.
 


Back
Top