S
srx_eh
Guest
I've removed my rear shock and bracket assembly from my 96'VMAX XT proaction +, removed the idler wheels (w/ C clips), ...but for the life of me I can't seem to figure out how to get the bearings off (I don't want to damage them.
Any advice would be appreciated.
Any advice would be appreciated.
take a old 14 mm bolt and thread it in to one side of the rear cross shaft and take a hammer and pound the crap out of it...the bearings have a slight press fit 
and the shaft will go
and the shaft will go
S
srx_eh
Guest
Tom,
Thanks, ...worked like a charm.
Dave
Thanks, ...worked like a charm.
Dave
You bet Dave, that what I am here for