I am running a 00 SRX and plan on installing the oversize wheel kit and a 1 1/4 ripsaw and transfer rods very soon. The transfer was terrible last year and I wanna try something totally different this year.
Where should I try the front and rear shock settings? I heard I should try 0 pre-load on the front shock. Is that true?
Just looking for some advice before the season starts.
Mark
Where should I try the front and rear shock settings? I heard I should try 0 pre-load on the front shock. Is that true?
Just looking for some advice before the season starts.
Mark
For start zero preload on the center shock with the skid in the air.....after you set your limiter strap. How heavy are you??
185
someone mention something about a 2.5 mm spacer for the control rod. Is this a yamaha part - if so does it go on the top or bottom ? THanks
someone mention something about a 2.5 mm spacer for the control rod. Is this a yamaha part - if so does it go on the top or bottom ? THanks
goes on the bottom...and yes it is a Yamaha Part
fortress
New member
t
tt
tt
S
srx_eh
Guest
got all my stuff done - I heard the wheel kit didn't help some so I am running bender rods - ripsaw and we'll see what happens
happy trails
happy trails
2ooosrx
VIP Member
- Joined
- Oct 2, 2004
- Messages
- 2,414
- Age
- 35
- Location
- Gurnee, Illinois
- Website
- www.cbperformanceparts.com
how does the ripsaw fit inside a stock srx. Will a 1.25 fit in a 2000 srx? Please let me know I am dying to get one in my sled. Also if it doesnt fit, what modifications did you do to make it fit in the stock chassis. Let me know, thanks
Matt
Matt