wymanlake2
New member
- Joined
- Sep 8, 2004
- Messages
- 2
Has any one done this? I was wondering what year if any of the Venture seat would bolt up? Any tips or suggestion would be greatly appreciated
Don
Don
I have one of these seats for my SX-R so the kids can ride with me once in awhile, it came off a 97 venture and then in 98 they went to a longer seat but still ran it on the 500 and 600 s, If I am not mistaken you can still get this older style 2 up seat from the dealers
YaMon
VIP Member
Any chance of seeing a picture of the seat on your sled, Mr. Sled?
ecopter
New member
Don,
I don't mean to butt into your thread here, but I also have a question on the two-up.
Tom, what is the hand warmer wiring like for your set up. I just picked up a seat from a 99 Venture to put on an '02 Vmax. From both passenger handwarmers, there are two longer wires running towards the front of the seat. While I know where the plug goes from the tail light, I'm completely stumped on where the wires plug to get power from the sled to the handwarmers.
Any ideas?
Jon
I don't mean to butt into your thread here, but I also have a question on the two-up.
Tom, what is the hand warmer wiring like for your set up. I just picked up a seat from a 99 Venture to put on an '02 Vmax. From both passenger handwarmers, there are two longer wires running towards the front of the seat. While I know where the plug goes from the tail light, I'm completely stumped on where the wires plug to get power from the sled to the handwarmers.
Any ideas?
Jon
I just put a venture seat and back rest on my wife's 2000 Mountain max. It was a perfect fit and looks really good. It bolts right up. It did require me to drill two bolt holes in each side of the tunnel for the backrest though.