vmax3
New member
Chopped EX
Chris, here are a couple pics of my nephews 79 440 chopped, dropped, stripped, piped, and carbed exciter. This sled is a blast to drive, and topped out at 85 mph on radar last winter.
He is running a single Aaen pipe, Twin vmax carbs on a phazer intake.
The whole sled has been dropped down, and chopped down too.
A shaved track with 100 1" ice picks and aluminum skis keep it straight.
This project has been alot of work, and has paid off for him.
http://www.totallyamaha.net/forums/showthread.php?t=15375&highlight=chopped+exciter
Chris, here are a couple pics of my nephews 79 440 chopped, dropped, stripped, piped, and carbed exciter. This sled is a blast to drive, and topped out at 85 mph on radar last winter.
He is running a single Aaen pipe, Twin vmax carbs on a phazer intake.
The whole sled has been dropped down, and chopped down too.
A shaved track with 100 1" ice picks and aluminum skis keep it straight.
This project has been alot of work, and has paid off for him.
http://www.totallyamaha.net/forums/showthread.php?t=15375&highlight=chopped+exciter
Chris
New member
Ya i think mine should top out at about the same mine is alot wider and i put elan skis on it . . . did you run stock reads and did you leave the equalizer in it from phazer intakes ? And do you knoe what size jets he used in it jus to make sure mines not to to lean . . . im not lowering mine i want it to look fairly stock from the outside jus the studs and wideing kit and elan skis