jr_amsoil
New member
I just bought an 01 srx and wondering about jetting it.
i took the jets out and the mains were 145 for all three carbs pilots were 45.
the elevation the guy i bought the sled from rode in 3000 to 6000 feet. and iam wondering what i should jet for. i will be riding at 1300 feet so any help would be great. i think i am gonna put variflow on it after i get it jetted right
i took the jets out and the mains were 145 for all three carbs pilots were 45.
the elevation the guy i bought the sled from rode in 3000 to 6000 feet. and iam wondering what i should jet for. i will be riding at 1300 feet so any help would be great. i think i am gonna put variflow on it after i get it jetted right
jr_amsoil
New member
hauck told me i need a 152 and 2 150's for the mains and 45 for pilots anyone think differently give me a shout 
That's what my buddy ran with hauck stage 11 porting also raise the needles or you will find out the hard way.
jr_amsoil
New member
where should i have the needles.
with the 45 pilots I would raise them 1 clip, try it and see how it runs mid range. Or stack both shims under the clip in the 3rd slot on needle if it seems boggy in the mid range cruising area.
jr_amsoil
New member
thanks for all the help 