redsnake3
New member
anyone have a good set up for the thunder shift kit? what springs are used? i just need a starting point because i dont have the booklet/instructions.
Thanks
Thanks
vipertripplexxx
New member
Are we talking about heavy hitters, or thunder shift weights? What base weight do you have? probably 48 gram? Primary spring with the stock 47* helix is black 150-300. Secondary spring was a yami silver. What helix are you running? Target RPM is 9200?
Do your weights look like these?http://www.thunderproducts.com/thunder_shift_heavy.htm
or these?
http://www.thunderproducts.com/thunder_shift_standard.htm
Do your weights look like these?http://www.thunderproducts.com/thunder_shift_heavy.htm
or these?
http://www.thunderproducts.com/thunder_shift_standard.htm
redsnake3
New member
they are the seconds ones the standard weights and a base weight of 38? i think. i know i weighed them. i think they are 38. i have a stock 47 and a rpc 52/36 also a stock 51/42? mtn rx1 helix. target rpm is 9200 or 9300
vipertripplexxx
New member
Sorry Snake,
I have the setup for the Heavy Hitters. Not sure about the thunder shifts?
I have the setup for the Heavy Hitters. Not sure about the thunder shifts?