valin
Active member
I ordered the following:
1 Mountain Machines Freedom axel for four 8" wheels
2 Mountain Machines Maltese 8" billet wheels
2 Mountain Machines Maltese 7" billet wheels
4 Mountain Machines Maltese 5.5" billet wheels
Needless to say it all wasn't cheap, but it's gonna look good up against the black powdercoated rails.
1 Mountain Machines Freedom axel for four 8" wheels
2 Mountain Machines Maltese 8" billet wheels
2 Mountain Machines Maltese 7" billet wheels
4 Mountain Machines Maltese 5.5" billet wheels
Needless to say it all wasn't cheap, but it's gonna look good up against the black powdercoated rails.
valin
Active member
valin
Active member
and no, that is not my suspension.
yamaholic22
Active member
why 7" and 8" wheels? Are the 7's for the carrier wheels? I've never seen the install process for these wheels before.
skidooboy
New member
ive got those on my 440, went with wahls for my viper. just remember when adding bling like that, the polishing factor and riding in less than perfect conditions effect how they look long term. snirt and studs are not friendly to the billetts. congrats on the new purchase. ski
richierich
New member
dude i could of saved you some money.i sell their stuff.fyi if your installing the freedom axle on a 121" the inside wheels are 6 3/8 or 7" not 8" .just the outside are.if its a 136" or longer then its 8" all the way.i didnt read your post all the way i guess you are using 7".
i ran that axle on my attak with just 2 inside 8".
i ran that axle on my attak with just 2 inside 8".