snow guy
New member
I bought a set of 9t Wahl extros thinking that's what I had in my MM but come to find out they are 8's. These are just the driver types and not the combos that drive off the lugs too. What I'm thinking is using these along with a pair of single lug 9t drivers then gear down to get it back to where I want it. Without really looking at the machine I'm wondering if there is enough tunnel/track clearance when going with a larger driver.
Sorry to say they wont work will a 2" lug track. Not enough room at the front heat exchanger. Tallest track you can go with, is a 1.75" with 9 tooths.
