circlip on pto bearing?

YAMAJOHNNY

New member
Joined
Oct 5, 2006
Messages
27
Age
67
Location
Sugar Grove Il.
On an 80 srx crank,the outer pto bearing has a ring similar to a piston ring on it. It only goes about 70% around the outer race. The parts list calls this a circlip. On reassembly, is the position of this critical? In other words,where does the gap face? Thanks in advance.
 
no, but I like to set them in the case so they touch both side halfs when assembled.
 


Back
Top