Where to find the rubber things that devide the exhaust pipes.

YAMAHIZAL700

YAMAHIZAL700

New member
Joined
Feb 12, 2005
Messages
863
Age
45
Location
durham, ME
Like it says, do any of you guys on here have the rubber things that devide my tripple pipes it seems mine are pretty well worn out and melted also the snaps that hold the seat onto the tunnel have ripped through and who knows of any tricks to fixing this. What do you guys think?
 
Maybe Im not explaining them correctly. There mounted on each pipe and are about 1 1/2 wide x 3 long. I didnt know if any of you guys sold them on here. ONe of my pipes is burning a hole throught the heat sheild on the pipe.
 
acnas said:
Don't know if this is what you are looking for but found them on 2000 and above parts list. Extreme has them for like $5 each. If this helps??

http://216.37.204.206/xtremepowersports/Yamaha_OEM/YamahaSnow.asp?Type=13&A=266&B=11

http://www.yamaha-motor.com/sport/parts/home.aspx
Click to expand...
THanks for the link but Its not on there. They are the 3 rubber pads that seperated the pipes so that they dont clang together. THey probably only sell them with the whole brand new pipe. Ill keep looking though. I was wondering if you guys know of a material that is the same thing stuff as these high heat rubber pads.
 
YAMAHIZAL700 said:
THanks for the link but Its not on there. They are the 3 rubber pads that seperated the pipes so that they dont clang together. THey probably only sell them with the whole brand new pipe. Ill keep looking though. I was wondering if you guys know of a material that is the same thing stuff as these high heat rubber pads.
Click to expand...

It wasn't the part #4 damper in the list? Looked like what you were looking for?

4 8DF-14737-00-00 DAMPER, MUFFLER
 
acnas said:
It wasn't the part #4 damper in the list? Looked like what you were looking for?

4 8DF-14737-00-00 DAMPER, MUFFLER
Click to expand...
No, Im pretty sure thats sort of the same thing but where it says required it only says 1, where there is actually 1 on each pipe. Thanks for checking.
 
YAMAHIZAL700 said:
No, Im pretty sure thats sort of the same thing but where it says required it only says 1, where there is actually 1 on each pipe. Thanks for checking.
Click to expand...
On second thought maybe your right Ill see if I can give them a call to make sure. Thanks for your help.
 
If no luck check with auto parts store, make sure you tell them that your pipes run from 1500 degrees to 2,000.
 
buck srx 700 said:
If no luck check with auto parts store, make sure you tell them that your pipes run from 1500 degrees to 2,000.
Click to expand...
I should pull one off and see if I can find one somewhere.
 
You must log in or register to reply here.


Back
Top