Can Anyone ID These Pipes?

GP292Racer

New member
Joined
Mar 12, 2006
Messages
111
Age
36
Location
Ottawa, Ontario
Anyone know what these pipes are for? I was told they were Yamaha, they got thrown in with a gpx I picked up a few years ago.

They are also for sale if anyone is interested.
 

Attachments

  • IMG_3097.jpg
    IMG_3097.jpg
    36.9 KB · Views: 23
  • IMG_3099.jpg
    IMG_3099.jpg
    40 KB · Views: 26

They do look familiar but they are not from an 81 SRX or 83 Vmax as I have both sleds and mine don't look like those If they were Yamaha they should have a code stamped in them, the 81 had 8M6 and the 83 had 8U9.see if there is anything like that and maybe you can figure it out.



:2strokes: :letitsnow
 
GP292Racer said:
Anyone know what these pipes are for? I was told they were Yamaha, they got thrown in with a gpx I picked up a few years ago.

They are also for sale if anyone is interested.

They look like 81 pipes, but the ends have been cut off and a different end welded on possibly. The ends could have been cut and rotated too that could be why they weld line runs down the middle. If it says 8R9 they are 82 SRX 500 pipes
 
they have never been cut/welded, so what you see is what they are, rupp wouldn't be out of line, there were quite a few rupp dealers around my area.
 
They don't look like Nitro/Magnum pipes at all. Cat maybe?

Picture1.jpg
 
im not sure what there from but they dont look much like vintage pipes the cones tapered header belly sections ect seem to be too well made to be a vintage pipe.
 


Back
Top