vmax3
New member
Vmax540
VIP Member
Dammmm..... that should come with a Sunglass Warning Label..... ! 
Brad_69
New member
Awsome. What did you use to polish it up that nice? Brad
vmax3
New member
Lots of elbow grease, steel wool, carb cleaner, and mothers polish. Plus repainting the hood. I have worked for a year and a half in my spare time cleaning and straightening this old pc of junk out. We rebuilt the motor, put on a new clutch, new track, studs, skis, and tons of bought used parts. Finally it is starting to show improvement.
YAMAJOHNNY
New member
I'm redoing an '80, I gotta agree, they are a real money pit. That tunnel looks great.When do we see the engine compartment?
vmax3
New member
I will send some pics when the engine and controls are complete, hopefully in a week or so. Still need to get my guages and water pump back on, then test run it. I hope it goes good.
77srx440
New member
- Joined
- Apr 10, 2004
- Messages
- 48
might have to put floats on it if this warm weather stays any longer.
its a good investment. they are nice sleds looking good!
nice job on it. looks sweet
vmax3
New member
Snojet Steve
New member
That is sweet! They are a money pit if you don't own your own company and drive a truck worth as much as most peoples houses!
I polished my Rupp frame with Mothers gold too, found it worked great! I used 3M syntetic scouring pads for most of it and then finally ALOT of rubbing with a rag for the first layer with the polish. Then I did a light rub with no polish. Then I put a really thin layer of polish on and lightly rubbed that in a circular motion. Then another light rub with none. It REALLY shines! It's been 2 years since I put the frame away and it still shines pretty nice.
I polished my Rupp frame with Mothers gold too, found it worked great! I used 3M syntetic scouring pads for most of it and then finally ALOT of rubbing with a rag for the first layer with the polish. Then I did a light rub with no polish. Then I put a really thin layer of polish on and lightly rubbed that in a circular motion. Then another light rub with none. It REALLY shines! It's been 2 years since I put the frame away and it still shines pretty nice.
GP292Racer
New member
Mothers is the way to go, I use Mothers Mag & Aluminum polish on everything, it works great and lasts a long time
looks nice vmax3, what town you in? im in dexter. we have a radar run up here every year you should bring your srx up! i will get the date when it is
vmax3
New member
I would love to run At Dexter sometime. The SRX is still being tested out and needs some tweeking yet. We did run it yesterday and were pretty happy with it, no radar but it was pretty quick compaired to my sons srx700.
Someday I will see you in Dexter.
We are in Lincolnville
Someday I will see you in Dexter.
We are in Lincolnville
ramblnman said:
I Should Know After Tomorrow Club Is Meeting Then To Discuss The Ice Condition. Its Not Good Though Talked To Someone Tonight Says It's Aweful Rough
vmax-540
Member
Hay Vmax 3 That is a great looking job! they are a nice sled . I just finished my 81 SRX project ,and it sure feels good to take her for a blast across the lake after a lot of hard work. I hope you enjoy that great sled !!
