shock mounts

RIVERRUNNER

Active member
Joined
Sep 18, 2006
Messages
1,058
Age
44
Location
Duluth, Mn
Well, I had the day off so I decied I would try to gain a little ride height in the front since I just got done putting 1.25 ripsaw on the back of my sled and I am also sick of the nose running in the dirt :o| !!!!!!!!!!!! Everything is back together it took about 30min!!!!!!!!! My front ride height at the bumper is 15.25 inches. That still seems pretty low. But, I can't wait to try out the new track and the added height in the front. Do I have to realign my ski's? Do I need to make adjustments to the rear skid now that the sled is sitting 1 inch taller in the front? If anybody else has done this without putting in new shocks I would like to know if they could notice any different ride characteristics??? I would like everything to be perfect for the ride I am going on saturday!!!!!!Just a few questions!!!!
Ps I also have some good pics showing how to do this mod, but my photos are to big and tech advice on how to make them smaller?
 

I have heard that you have to readjust the skis and the skid. You will also loose some of your ski width.
 
if you did anything to the front of that sled, you need to adjust the alignment.
go to the link below for the line up.

if you want real long travel in the front, i sell brackets for doing that.
 


Back
Top