givemeaboost
New member
Anybody know the torque for the head and sequence for 97 Mountain Max ?
yamaholic22
Active member
do each cylinder in a star pattern or criss-cross pattern starting with the center cylinder and go to 24 ft-lbs on the cylinders and 17-18 ft-lbs on the head
givemeaboost
New member
That's a quick response, thanks, Ken..
givemeaboost
New member
Aslong as your still on ,what about using coppercoat or just put the gaskets on dry.
daman
New member
givemeaboost said:
daman
New member
Do thos torq's in two steps
1'st is 9.4 ft. lbs.
2'nd is 18 ft. lbs.
1'st is 9.4 ft. lbs.
2'nd is 18 ft. lbs.
jt specialties
New member
If you split your gasket. Copper coat is a yes
givemeaboost
New member
Thanks guys, now if it would just warm up enough to work on it I can go ridin, Ken.