I took aprt an 81 srv secondary to clean and put in new buttons.Like a dumb ??? I didnt make note or markigs of settings for reassembly. I just simply put it back together. While putting the belt on I notice that the sheave moves very easily. The spring is In the #3 hole which Im certian where it was. So Im asumig the sping needs to be a preload. My delema is how much. I cant find any info on a degree, other than a guy has it listed in the TY tech section "User Tunning Chart" as b1 30. I dont know what this means. Any help would be greatly appreciated. Its the only thing left to do before it hit the trail. Mods include Bored 30 over, shaved head, ported,DG pipe, comet clutch and 93 ExciterII rear suspension. Any pogo stick mods out there for this sled? Ride On!!!
Last edited:
srv540
Member
b hole + 1 hole = 30 degree twist, here these might be able to help you out on the SRV
http://s3.quicksharing.com/v/4493737/srv_tech.pdf
http://s3.quicksharing.com/v/4493737/srv_tech.pdf
srv secondary
Only one hole in sheeve.Numbered holes in helix. Still confused. I tried 3 times to get the document down load but it wont finish.Thanks for the help.srv540 said:
