Orv
New member
- Joined
- Sep 3, 2005
- Messages
- 9
- Age
- 56
- Location
- Crosslake, MN 56442
- Website
- www.weighttrainingworkouts.com
Is the Chaincase/chain the same on 97 600 twin and 98 700 triple?
My 700 triple broke(the chain) and I have a 97 600 XTC twin that I am parting out - can I use that chain?
Thanks
Jim
idealpublishing@crosslake.net
My 700 triple broke(the chain) and I have a 97 600 XTC twin that I am parting out - can I use that chain?
Thanks
Jim
idealpublishing@crosslake.net
Last edited:
The case and cover look to be the same as far as part numbers go, but I believe the 700 is geared taller, the taller gear and chain will still bolt in though.
Try a part number check from the Yamaha parts link on the TY home page, that will tell you for sure.
Try a part number check from the Yamaha parts link on the TY home page, that will tell you for sure.
Last edited:
Simply count the links and width to match up the 2 for the chain, The SRX used a wider chain, I am assuming you are refurring to an SX or XT/C 700?Orv said:
snoden700viper
Member
Count the links of the chain and the teeth on the gears. They are the same width so they will just slide right in.
davessrx
New member
I think they are, I just crossed parts from a 98 venture 600 twin to a 2000 sxr 700 for the chaincase and its the same!!!!!! Check yamaha fiche Go to port yamaha link or any others