w8tn4snow
New member
I am going to be studding my Viper this weekend with 1.250 studs( overall 1.480) Iam going to be shaving about a quarter inch off my track to gain clearance for the studs . My question is this , Will I be in danger of hitting the heat exchangers if I dont use studs that protrude any further than the original height of the lugs on the track ? Since My sled has a 1.250 risaw on it now and I shave down to 1 inch then stud up to 1.250 theoretically i shouldnt have any problems . right ? Also I did buy tunnel protectors but am not sure how they go on , do I need to drop the suspension to install these ?