Hauck
New member
- Joined
- Mar 20, 2006
- Messages
- 20
Accually, the sled runs fine... but the handwarmers dont work and the speedo will start over again when i switch to highbeam.....
It also bogs sometimes in deep powder.
But it has been like this sense i bought it about a year ago. Other than that it runs perfect.
But today when i was looking .... just to look, i saw that one of the white cables that comes from the stator is all stripped down...
I know its´ seems to be a common problem on Vipers, but what to do, by a new stator or can i just retape or try to change the cable that is stripped?
It also bogs sometimes in deep powder.
But it has been like this sense i bought it about a year ago. Other than that it runs perfect.
But today when i was looking .... just to look, i saw that one of the white cables that comes from the stator is all stripped down...
I know its´ seems to be a common problem on Vipers, but what to do, by a new stator or can i just retape or try to change the cable that is stripped?
SRX7
New member
If you can get some heat shrink tubing on there thats the best. Electrical tape may not work or grip if its oily.