HOW TO: put rx-1 skis on your strut sled.

I put a set of saddleless skis on my Phazer II. They look very nice when done. Like you said BTV, the big thing is dealing with the depth... I used a air grinder with a cutting bit and slowly removed material until it fit, you also need to get rid of the plastic 'cross member' just in front of the mount. I don't see that being too much of an issue since there is one more further forward, and you still have the support from the mounting bolt.
 
Tried the saddleless a few years back when I wanted to stick a set of mountain skis on and it just did not work; hacked up one ski to come to that conclusion.

The RX-1 skis with saddles are pretty much a straight bolt up. Saw two sets of RX-1 skis on ebay but they were so beat up I woudl not even consider them (and they wanted almost a $100 for each pair-coudl nto even make one decent set out of both).
 
Can anyone else not see the pics on post 1 and post 2 anymore? Can these pics be reloaded/redirected so they show?
 
I have dimensions to trim the Viper/RX1 saddles down to fit the 98-99 old style VMAX/SRX skis if anyone has interest. I'm running this set up on my XLV this year. You still need to add 1/4 inch shim plates under the saddles but that's easy. The advantage of this combo is the fact that it pretty much retains the factory front ride height. I also have a set of Viper/RX1 skis laying around in my garage that won't be getting used. They have one season on them... Just sayin!
 
I have dimensions to trim the Viper/RX1 saddles down to fit the 98-99 old style VMAX/SRX skis if anyone has interest. I'm running this set up on my XLV this year. You still need to add 1/4 inch shim plates under the saddles but that's easy. The advantage of this combo is the fact that it pretty much retains the factory front ride height. I also have a set of Viper/RX1 skis laying around in my garage that won't be getting used. They have one season on them... Just sayin!
 
You must log in or register to reply here.


Back
Top