hauck pipes

[xt700]

hey guys just picked up some pipes, wondering if anyone know what they recomended for baseline jetting? kind of hot right now to do any testing but would like to be in the ballpark when the snow flys.

Thanks

Pat

 

[Sxr700Bandit]

Pat, Call Hauck and ask them for the jetting specs. Give them some sort of b.s story on that you bought the sled and just want to make sure it set up right...T

 

[jabber800]

I believe the hauck pipes are the same as the CPR pipes. If so you will really like these pipes!!!! PM me your e-mail and I'll scan the set up sheet for you. I can even put you in the ball park with clutching... We just pulled 87 mph in 500ft. on grass with these pipes and minor engine mods!!!!! They haul...

 

[yamaholic22]

I used 150's in mine and they were PLENTY safe. Can't remember what I did with the needles, I would have to pull out my notes and see. These pipes really do haul as jabber said. If you need any setup help let me know.

 

[Turk]

I ran em in ome of my 700MM,s.
#47.5 pilots
150 mains
raise needles 1/2 right thru
1 3/4 out on fuel screws.
Clutch em to run at 8900 rpm