ExpertXViper
New member
Alright guys I wanna send out my single pipe and manifold for ceramic coating. Gimme some ideas on who does good work, for a reasonable price and is located within the US. Let me know who you guys send your business to. Thanks, Brett
krellheat
New member
- Joined
- Oct 25, 2006
- Messages
- 35
- Age
- 63
- Location
- Center of the Connecticut Universe
- Website
- www.maplehilltrader.com
I've been sending my stuff to http://www.centralctcoatings.com/ I beleive they is still going by the price list of Airborne Coatings. They use to be part of Airborne Coatings.http://www.airborncoatings.com/homepage.html
You can tell them Felix sent you.
Below is a picture of a 98 Thundercat I modded.
You can tell them Felix sent you.
Below is a picture of a 98 Thundercat I modded.
Attachments
Last edited:
bufalobob
Member
expert:
bender racing ( dynoport ) does very nice ceramic. 716 941 5840.
bob
bender racing ( dynoport ) does very nice ceramic. 716 941 5840.
bob
jwiedmayer
New member
http://www.performancecoatings.com/
I have used these guys three times. Even though the parts get shipped to the other side of the US it always seems fast. J
I have used these guys three times. Even though the parts get shipped to the other side of the US it always seems fast. J
Allvipedup
New member
I did alot of research on the subject, looking at over 10 companies in all, and found that "jet-hot" is a pretty sweet deal. They seem to hold the best gaurantee and are the most thorough with their precleaning, to assure it will last. They are very reasonabley priced with quick turn times. Check em out at Jet-hot.com
I just got my single pipe and manifold back from Jet Hot. They did a REALLY nice job! This is a very thick coating with a lifetime guarantee. Well worth the $$$!
If you send them an e-mail, they will send you a packet of information and the shipping documents. Very simple deal that only took them a week.
If you send them an e-mail, they will send you a packet of information and the shipping documents. Very simple deal that only took them a week.
2ooosrx
VIP Member
- Joined
- Oct 2, 2004
- Messages
- 2,414
- Age
- 35
- Location
- Gurnee, Illinois
- Website
- www.cbperformanceparts.com
Jet Hot for sure!
ExpertXViper
New member
Jet-Hot quoted me at $150 for both manifold and pipe using their Sterling Coating. Good deal IMO. Thanks for the help fellas.
They did my pipe and manifold for $125.00 a couple of months ago! Lean on them! 
ExpertXViper
New member
Mtn-Track said:They did my pipe and manifold for $125.00 a couple of months ago! Lean on them!
Will do, thanks for letting me know. If you could either post or PM me your name, just in case they try and gimme sh$$ about it I have a reference.
