Apsley Max
New member
I was wondering if anybody has ever tried 38,s off of a ski doo 780 triple, on there triple yammies? I think I may have seen it done on here before, but can't find it.I don't think it told of any jetting recomendations either.I have a line on some, and my buddy is interested in them for his 97 700sx.Any info would be greatly appreciated.Thanks.
yamaholic22
Active member
You're right people on here have done it before but off hand I can't remember exactly who. Try "bufalobob", "800" or "Mrviper700".
Junior
New member
it's been done. If you can get ahold of SRX-extreme he'll walk you thru it I'm sure, very nice guy and they ran very well on his SRX. He's out in Calgary.
bufalobob
Member
amax:
on a stock motor you will get more benefit from spending the $$ on clutching &/or gearing - & less aggrevation. 38's work best on modified engines.
bob
on a stock motor you will get more benefit from spending the $$ on clutching &/or gearing - & less aggrevation. 38's work best on modified engines.
bob
Apsley Max
New member
Yes, all of the other work has been done.Thanks.What needle jet and jet needle are being run in these carbs when installed on 97 sx700??bufalobob said:
bufalobob
Member
amax:
Yes, all of the other work has been done.
need more info. race or trail port - whose pipes.
bob
Yes, all of the other work has been done.
need more info. race or trail port - whose pipes.
bob