Saturday:
The Saturday racing was a tight race. In the Stock D class is was 3-2008
Yamaha FX Nytro's and 1-2004 Ski Doo Rev. The FX Nytro's finished 1-2-3
with only .04 between the three of us. The Stock C class was also close
with 4-2007 Yamaha Apex RTX's in the final and only being .02 between us!
Some great racing action!
Stock D: 2nd - Allen Ulmer 2008 Yamaha FX Nytro RTX
Stock C: 3rd - Allen Ulmer 2007 Yamaha Apex RTX
Sunday:
The Sunday racing was just as tight as Saturday's racing! In the Stock D
class is was an all Yamaha final with 4-2008 Yamaha FX Nytro's on the line.
The finish was within .05 from first through fourth! The Stock C class
(Yamaha Apex) we misread the track slightly and spun in the first round.
Another great day of racing, hope to see everyone at Hay Days!
Stock D: 2nd - Allen Ulmer 2008 Yamaha FX Nytro RTX
Stock A: 4th - Allen Ulmer 2001 Yamaha SRX
The Saturday racing was a tight race. In the Stock D class is was 3-2008
Yamaha FX Nytro's and 1-2004 Ski Doo Rev. The FX Nytro's finished 1-2-3
with only .04 between the three of us. The Stock C class was also close
with 4-2007 Yamaha Apex RTX's in the final and only being .02 between us!
Some great racing action!
Stock D: 2nd - Allen Ulmer 2008 Yamaha FX Nytro RTX
Stock C: 3rd - Allen Ulmer 2007 Yamaha Apex RTX
Sunday:
The Sunday racing was just as tight as Saturday's racing! In the Stock D
class is was an all Yamaha final with 4-2008 Yamaha FX Nytro's on the line.
The finish was within .05 from first through fourth! The Stock C class
(Yamaha Apex) we misread the track slightly and spun in the first round.
Another great day of racing, hope to see everyone at Hay Days!
Stock D: 2nd - Allen Ulmer 2008 Yamaha FX Nytro RTX
Stock A: 4th - Allen Ulmer 2001 Yamaha SRX
jr_amsoil
New member
congrats ulmer
yammiman
Member
Congratulations Allen - I didn't know you still had your SRX!!! - glad to see they can still hang!!
Srxspec
Your #1 performance shop!
Yes, SRX still rides along in the trailer and still can run with the best! Now only if it were 30-40 lbs lighter and it'd be out front!
Dave_Vmax600
New member
well you can make it lighter....just need to do a lot of custom fab work.
Srxspec
Your #1 performance shop!
No, we can not make it lighter. We have a certain amount we have to weigh set by Yamaha.
dynofun
New member
- Joined
- Nov 14, 2005
- Messages
- 355
Good job Al! Also, congrats on the new young'n.
Srxspec
Your #1 performance shop!
Thanks dyno! See you at Hay days?
BETHEVIPER
Life Member
i never understood that isr crap.
why dont they make a class for 4stroke sleds and why dont they make all the sleds in a class weigh as much as the heavy one?
why dont they make a class for 4stroke sleds and why dont they make all the sleds in a class weigh as much as the heavy one?