02viperstinghurts
New member
I'm going all out this winter on my Viper, MBRB race can, rear skid drop brackets, 1 1/4 ripsaw, seat riser, but i am having 1 problem. I want to put a 5 inch pivoting ROX riser in, i know i need longer throttle cable, oil pump cable, and extended brake line. Will the cables out of a 03 mtn viper be long enough to do the 5 inch ROX riser or do i need something else or maybe do some re-routing?? Please help me if you can. thanks
You need the longer 03 mtn cables and reroute them. That mbrp race can will be way to loud for trail ridding. Rich can set you up with all of it at www.richmotorsports.com Maxdlx
Yamaouch08
VIP Member
not to highjack but,I am going with a rox riser on my Viper and was wondering if I can do a 3.5 with stock cables?
M-Max
New member
I am not sure about a viper. I rerouted cables on my 01 mm 700 and
only needed a longer brake line for a Rox 5 1/2 riser.
Gravity Worx also have some nice cables. They are an oil, throttle cable in one with no extension box.
only needed a longer brake line for a Rox 5 1/2 riser.
Gravity Worx also have some nice cables. They are an oil, throttle cable in one with no extension box.
I ran 3.5 on my viper with, just rerouting. The brake line is tight tight