shavedheadedyamaha
New member
here i am puttin a m-10 track out of a ski-dont in to my srx 700.... is it way way hard or can i just get a kit.... any help will be good... 
1badz
New member
- Joined
- Nov 19, 2005
- Messages
- 179
Get the proper kit from Fast and a set of instructions. Measure twice ( or three times ) and drill once. It's not too big of a deal if you're not changing the track. I had to on my last two swaps as I went from 121 to 136, on my 01 800 MXZ and on my 02 Viper. You might get lucky and pick up a kit on Ebay or one of the forums; just make sure you get the right one.
I'm not sure if you'll be calling it Ski-don't when you run up against a 155hp 435lb XP LOL
I'm not sure if you'll be calling it Ski-don't when you run up against a 155hp 435lb XP LOL
shavedheadedyamaha
New member
i am changing my track from 140 or a 141 a 2 inch to a 144 2 1/4 finger track is that going to have a big impact on the swap