htgindy
New member
- Joined
- Aug 9, 2006
- Messages
- 10
This topic has probably been discussed here already, but I just picked up a really nice '81 SRX that is stock except for 38mm Mikuni roundslides and no oil injection. Is this the all-around best choice for carb size on this engine? How about jetting? Thanks in advance for any help.
YAMMIEGOD3:16
Active member
I WOULD PRE-MIX AT 32:1 RUN GOOD OIL AND REAL GOOD FUEL. 38 mm IS GREAT SIZE HERE. START RICH. WORK BACK. WATCH PLUGS AND WASH. MAYBE 380 MAINS FOR START. 3:16 (yammie tony)