Kidd700V
New member
hey guys i have a 97 sx 700 and am switching from psi tripple pipes back to a stock single setup with can head gasket mod and reed spacers and was looking for clutching and jetting ideas for the stock setup any help is great thanx
142.5 mains
drop needles 1/2 from stock
Change inner rivet to a 3.6; outer to a 2.4 & run a rx-1 helix
Stock 97 700 sx clutching & jetting set up has now been done 1,000,001 times!!!
drop needles 1/2 from stock
Change inner rivet to a 3.6; outer to a 2.4 & run a rx-1 helix
Stock 97 700 sx clutching & jetting set up has now been done 1,000,001 times!!!
TURK,
Does that mean just taking a single needle shim and moving it on top of the clip?
Does that mean just taking a single needle shim and moving it on top of the clip?