T.S.U.Filmz
Member
ok i have some LED's can i hook them up to my hand warmers on my 98 SRX right after the ignition so i can turn them on and off with the key? if so what wires do i need to use? plez help me out i am looking to go out there tomorrow and hook these up. thanks
oops posted this in the wrong place can someone move this for me plez?
Jeff
oops posted this in the wrong place can someone move this for me plez?
Jeff
Last edited:
my guess led will need dc current as in a battery
T.S.U.Filmz
Member
ok where can i pull that from?
BlueIronRanger
New member
- Joined
- Nov 26, 2003
- Messages
- 315
I don't know if the SRX's are like the SX-R's but my SX-R has a capped off plug by where the battery would be mounted if it had electric start and those wires supply DC current.
When your done let me know how you did it and post some pictures, I may be doing this as well but not until after the 1st...
T.S.U.Filmz
Member
thank you i will go out and check it out. T will let you know Cole
T.S.U.Filmz
Member
can i pull DC power form the rear tail light?