Bored carb jetting help

MRFUSION

New member
Joined
May 29, 2006
Messages
15
Age
51
Location
Peace River Alberta
We put together a MM700 and this what I know so far, the motor was ported by Aaen, it now has bender pipes on it with a Peak head with 20cc domes installed. I had a set of bored carbs to 35.5 laying around so we are trying them on this unit. We are trying to dial it in for home here at about 2200ft and maybe -15c ballpark. Any jetting help would be appreciated on this, I am wondering with the bored carbs how different the jetting is. Thanx for the help. Shad
 


Back
Top