rx-1 sup to srx help!!!!!!

[D-HK45]

i need to know step by step what i have to do to put my rx-1 suspension in my srx, and i have a chance to get a pro-x suspension is there a lot of work to put that in my srx please help

 

[S.X.]

i need to know step by step what i have to do to put my rx-1 suspension in my srx, and i have a chance to get a pro-x suspension is there a lot of work to put that in my srx please help

If it is an 03/04 RX skid it will bolt right up, if its an 05 Mono skid there are alot of guys around that did that swap and I am sure you will find hep here.

 

[D-HK45]

Sup

HELP GUYS

 

[shortstop20]

You will need to use the rear upper cross shaft from your SRX suspension in the RX-1 skid.

Here are the measurements for mountaing a Pro-X skid in a RX-1.

http://www.jbshocks.com/edgeswap/proxmount.jpg

 

[jr_amsoil]

what shortstop said did the same swap to my srx but got rid of the stock rear shock in the rx1 skid as it is not rebuildable.

 

[D-HK45]

Shaft

WHY DO I NEED TO CHANGE OUT THE UPPER SHAFT YAHAMAS ARE NEW TOO ME

 

[S.X.]

The tunnel must be slightly wider, mount points are the same.

 

[shortstop20]

Yes, the SRX tunnel is wider. It only takes 5 minutes at most to swap the shafts.