vmax4ken
New member
need help please i have a1995 vmax 500 with reverse the jackshaft is a two peice and its stripped.. now heres the question will a one peice shaft fit with out changing the chaincase...thanks...
tedgoesfast
New member
i might have a on piece and a 2 piece call me tommorrow at my shop and i will check 1-506-453-9818 ask for ted
cougar1985
New member
as another option ,i got a used shaft that was not the same length and heated up the splined end and drove it off and switched it around with my bad one.last case scenerio is to get a good welder to weld the bugger on there for good!as i said last case scenerio.,but does work as a few guys have done that around here.also i put in a new shaft from the chaincase just for insurance.getting ready for work and its really blowing hard outside,hope we get a nice storm.
cougar1985
New member
if you get a one piece shaft that will work ,let me know the exact year and number if you can,i hope mine never breaks but you never know.i have a 96 600 with the alternate reverse and the actual shaft is not very easy to come by any more and is pricey.very stupid design in my books.