redrider24940
New member
This is on a 97 sx. Will everything line up if i swap my 97 crankcase for a 98? Will I have to get new cyclinders? Will I have to get a new stator or anything besides new gaskets? Is the stock piston 70.5 mm? Thanks for the help-Red
Newfoundlander
New member
According to the microfiche the part #'s for the crankcase and the cylinders are the same the heads have a different part # though as well as crankshaft assembly so i'm not quite sure what the difference is.
tedgoesfast
New member
i think all the differance is beeffed up pto bearings
yamaholic22
Active member
tedgoesfast said:
Yup, that's the difference.