lol Not to open a can of worms but.....

Skidooslayer687

Skidooslayer687

Member
Joined
Dec 17, 2006
Messages
711
Age
38
Location
Almonte Ontario Canada
lol Not to open a can of worms but.....another oil question

I Know this has been brought up a zillion times on here... lol and i've been reading posts all night.... but

what oil should you use for a break in procedure??

I've got a full tank of amsoil interceptor now.... what do i do??

lol i know this is bound to bring some extremely interesting discussion lol

:bash:
 
Last edited:

im running amsoil in both my sleds for breakin.....getting sick of cleaning pv's every couple hundred kms.....
 
Skidooslayer687 said:
I Know this has been brought up a zillion times on here... lol and i've been reading posts all night.... but

what oil should you use for a break in procedure??

I've got a full tank of amsoil interceptor now.... what do i do??

lol i know this is bound to bring some extremely interesting discussion lol

:bash:
Click to expand...
With the new rings they sell now, it doesn't matter...run what ya got...you'll be fine...heat is your biggest enemy, amsoil will help in that department...cheers
 
all i know is to listen to the guys that do this for a living. LIke mr viper, he told me to run dinosoar oil for break in. I takes 1 min to syphon out the old oil.

I just ran 2 littres of castrol super snow oil.
 
the way i understand the posts i've read on this topic... the rings will seat with both types of oil, however synthetic takes a while longer to get them to seat... this is from what i understand of it anyways.
 
I have been running mine with Yamalube since the new rings. I am going to run it a while longer like that before I swap over to Amsoil Interceptor. I did a search on the subject. Everyone has their own view on it. Could read searched documents on the subject for days. I followed MrViper700 recommendations.
 
ExpertXViper said:
That means no Yamalube right Daman???
Click to expand...
I thought you use Amsoil Interceptor for break in's on yours?

yamasluge will work, it's a syn. blend and i bet there's less then 1% Grp III syn base stock in that stuff,they never say how much of each is in there.

a blend does not mean 50/50 could be 99/1, thats all thats neede to be called a blend/semi-synthetic.
 
Last edited:
daman said:
I thought you use Amsoil Interceptor for break in's on yours?

yamasluge will work, it's a syn. blend and i bet there's less then 1% Grp III syn base stock in that stuff,they never say how much of each is in there.
Click to expand...


Yea Ill actually be breaking in my Viper with Interceptor this weekend once I get up north and get her all back together. Gotta hone them cylinders first, with a 3 STONE HONE of course. LOL another time bomb topic

I was just givin ya a hard time cause it says "SEMI SYN" on the yamalube bottle.
 
Last edited:
ExpertXViper said:
Yea Ill actually be breaking in my Viper with Interceptor this weekend once I get up north and get her all back together. Gotta hone them cylinders first, with a 3 STONE HONE of course. LOL another time bomb topic

I was just givin ya a hard time cause it says "SEMI SYN" on the yamalube bottle.
Click to expand...
I know you were you dog!!!!!! lol :)
 
You must log in or register to reply here.


Back
Top