00 srx 7 track replacement

[iceman]

I need some feedback on a replacement track on my srx 7 I ride hard pack trail and lots of long pull lake runs I also need too run studding I would say most of my running is higher mph lake running . Thanks iceman

 

[iceman]

I must of missed something

the question of what tracks have been used as a replacement for a 00 srx got zero responce. Yes this my first post at TY and may not have understood the proper process for a out of nowhere rookie to post. And if I have oversteped my boundaries please let me know what they are ? Thanks iceman.

 

[SRX44]

I'm trying a Camoplast ice attack track this year. Which is a pre studded (lug stud) 1 inch hacksaw. I like the track but if your going to do alot of drags on ice these style studs will lack out of the hole. Now they are getting better with some suspension adjustments and I really need transfer rods. For all around riding this is a nice track so far.
Good Luck

 

[chadman]

I love the performance of my 1" hacksaw.

 

[iceman]

Many thanks for your replys srx 44 and chadman on the one inch hacksaw are you useing trail studs ? And what length did you use,is there plenty of clearance ?

 

[DV8]

1.25 camoplast , Hacksaw track with 1 3/8" studs, Works great awesome hook up, However I have transfer rods and my Suspension is pretty dialed in.

 

[Roost 'Er]

1" hacksaw here, predrilled for 144, then i added 48 on the outside... so im running 192 1.175" Studs, 48 in double backer all with 0.5" tall nuts

 

[iceman]

Thanks again guys for your response,DV8 that sled of yours would make running slush a sport.And that awesome nailed up track on Roost Ers sled well lets just say lineing up against him on the slippery stuff would be a huge mistake.I do think that a 1 inch hacksaw will be my choice and set a pattern of single and double plates in and around 144 as to keep the rotating mass down a bit to run long lake pulls I have a great distance to run a river to get to my cabin.Thanks ICEMAN