SureshotDrilling
New member
My Dcs Light Keeps comming on at varing rpm's. Brought sled to dealer new sensor and various needle pos. and jets. Currently I Have 175 main and needle pos 3 still light flash. Only thing not stock rad valves. Read many of the posts and nothing seems to work The dealer is talking new Cdi box But I dont Know. Thank You. Ride In 1400 feet Flat land I Know but Any Advice Would help. Premium fuel just put in and same thing. Thanks again.
Powder Trax
New member
I heard it can happenfrom vibration of pipes, clutching issues. I have the same sled with mods I bought this past September and had the light come on a few times, but hasnt lately. I fastened pipes down with a few more springs.
I would say (like the previous owner of my sled said) read your plugs and pistonwash, if it looks good, then just unplug the DCS.
I would say (like the previous owner of my sled said) read your plugs and pistonwash, if it looks good, then just unplug the DCS.
SureshotDrilling
New member
I am Leaning towards that unplug thing more and more. See other post in viper section. Thanks for advice.